FLEXOGRAPHY PRINTING
This is a contact process.
It is most widely used for printing of films basic parts:-
BASIC PARTS
Fountain Moll
Anilox
Plate cylinder and impression cylinder.
PRINTING UNITS AND PROCESS
1. This is a process most widely used for printing packages made from film.
2. In this flexography the image is carried on a steres, made from rubber, which encircles cylinder.
3. The rubber stereo which carries the image and is fixed to the printing cylinder.
4. The ink is fed from a duct roller which is partially immersed in an ink bath.
5. The duct roller and the anilox roller controls the amount of ink which transfer the rubber stereo.
ADVANCED FLEXOGRAPHIC PRINTING MACHINE
Automatic tension control with load cells on unwind. Web guiding system
Hydraulic system for lift-off/ on of plate cylinders and continuous rotation of inking roller with hydraulic motors.
Doctor blade system
Maximum mechanical machine speed of 90M.P.M.
Lubrication system.
Water cooled chill roll on rewind.
No comments:
Post a Comment